FDP Home Page / FDP Forum / FAQ's

The FDP is made possible by the following companies and individual members like you.
Please use the links below to show them we value their sponsorship.

MOD KITS DIY

Sweetwater

Jensen Loudspeakers

Amplified Parts

Antique Electronics Supply

WD Music

Yellowjackets Tube Converters

Apex Tube Matching


* God bless America and our men and women in uniform *

* Illegitimi non carborundum! *

If you benefit and learn from the FDP and enjoy our site, please help support us and become a Contributing Member or make a Donation today! The FDP counts on YOU to help keep the site going with an annual contribution. It's quick and easy with PayPal. Please do it TODAY!

Chris Greene, Host & Founder

LOST YOUR PASSWORD?

......................................................................

   
FDP Jam
Calendar
Find musicians
in your area!
  Search the Forums  

FDP Forum / FDP Unplugged - Acoustic Instruments / Study Shows Wood Type Has No Discernable Effect on Sound

Next 20 Messages  
Gene from Tampa
Contributing Member
**********

Tampa, FL

Press On Irregardless
Jan 22nd, 2019 06:12 AM   Edit   Profile  

You can read the details below. This is for acoustics built identically but with sides and backs of six different woods. Blind testing showed the testers could not discern much difference all other things being equal between them.

Read about it here

(This message was last edited by Gene from Tampa at 08:13 AM, Jan 22nd, 2019)

jhawkr
Contributing Member
**********
**********
********

Wichita, KS USA

It's all gravy from here on...
Jan 22nd, 2019 06:28 AM   Edit   Profile  

The top wood makes the biggest difference but I believe I could discern the warmth of mahogany or cedar back and sides vs. a brighter rosewood.

MJB
Contributing Member
**********
***

Who's we sucka?

Smith, Wesson and me.
Jan 22nd, 2019 06:34 AM   Edit   Profile  

I probably tried 6 or so 00028ec guitars before I found "the one".

Although these were all the same model, all the same woods, they all sounded different to me.

IMO there are many things that affect the sound of an acoustic guitar, the selected woods just being one of them.

Ragtop
Contributing Member
**********
********

The older the violin

the sweeter the music.
Jan 22nd, 2019 07:10 AM   Edit   Profile  

Bob Taylor once got into the middle of this argument and built a few guitars out of pallets off the loading dock.

They were cool looking guitars with nail holes in them, and made of low grade pine or spruce or who knows? By all accounts they sounded great.

I'll bet they are pretty collectible now, wherever they are.

Peegoo
Contributing Member
**********
**********
**********
****

Just beyond Mars

there's a world of fools
Jan 22nd, 2019 08:23 AM   Edit   Profile  

In my experience, mahogany and cedar generally are more mellow sounding than spruce for guitar tops.

But sides and backs? You could make 'em out of old underwear and stale donuts and they'd sound the same as walnut or maple :o)

Te 52

Laws of Physics

strictly enforced
Jan 22nd, 2019 10:02 AM   Edit   Profile  

While I heartily approve of basing conclusions on the result of controlled experiments rather than "conventional wisdom," you'd have a hard time convincing me that a Martin D-28 (rosewood back & sides) sounds the same as a mahogany Martin D-18 (mahogany b/s).

As to why that difference exists, I'm not sure, except to say that it has something to do with mass, stiffness, and damping. But that's kind of a non-answer.

(This message was last edited by Te 52 at 12:04 PM, Jan 22nd, 2019)

El Kabong
Contributing Member
**********
******

NJArmpit of Universe

A-Ahhl do the thinnin' around here!
Jan 22nd, 2019 10:23 AM   Edit   Profile  

"But sides and backs? You could make 'em out of old underwear and stale donuts and they'd sound the same as walnut or maple :o)"

Peegoo,
You've tried this?

stratcowboy
Contributing Member
**********
*****

USA/Taos, NM

Jan 22nd, 2019 06:08 PM   Edit   Profile  

Are those glazed donuts, or jelly-filled variety?

Peegoo
Contributing Member
**********
**********
**********
****

Just beyond Mars

there's a world of fools
Jan 22nd, 2019 07:51 PM   Edit   Profile  

No, I haven't tried it.

I've thought about it tho!

reverend mikey
Contributing Member
**********
****

N of I-90, E of I-29

You're old. Then vintage. Then good!
Jan 23rd, 2019 08:50 AM   Edit   Profile  

I agree (with the assertion in the article) that other woods can be used to make beautiful sounding guitars (I have a Martin dread with Sycamore b/s on order, so I'm looking forward to testing this assertion personally)...

...but I also hear a distinct difference between my two Martin Jumbos - one with b/s of Indian Rosewood, one with b/s of Mahogany. There are a couple other small differences in their materials and build (one has a rosewood bridge, the other an ebony bridge, and one has a large sound hole), but the type of wood DOES impact the tone enough to distinguish them from one another.

In the future, wood guitars will be made with other woods - and sound wonderful. But there will be differences in their tone. Will that matter? Not really. Who listens to any singer songwriter and says, "Yeah, I love the sound of that maple on their guitar..."



twangdoodles

michigan usa

Jan 24th, 2019 01:00 AM   Edit   Profile  

"but the type of wood DOES impact the tone enough to distinguish them from one another"

The thing is, your two guitars have different tops, which is where the majority of the sound and tone comes from. Not to mention the other differences you noted. To get the most of what the top can provide you want the back and sides to be as stiff as possible so as to not absorb any of the vibes of the top. Laminated backs and sides are not found solely within the cheap guitar market.

A similar test was done in recent years with nylon string guitars with similar results.

Do the different wood types produce particular tonal characteristics when used for backs and sides? I don't think so. If they do we can't know because each piece of wood is different. As these types of test always prove, we listen with our eyes much of the time.

Just for fun I'd like to see a blind test with only D-18s and D-28s...

Viera
Contributing Member
**********
**********
*****

Boycott Amazon

Thank you FDP sponsors
Jan 24th, 2019 06:41 AM   Edit   Profile  

My Gibson AJ with rosewood b/s much more resembles what stereotypically one would expect from an acoustic with mahogany or even maple b/s.

Every string rings out clear when strummed as opposed the blending of the strings which is stereotypically expected of rosewood b/s.

At this point I couldn't care less what wood the b/s are. It's a great sounding acoustic.

thumbpicker
Contributing Member
*******

St. Louis

"Thumbpicks don't slide into soundholes"
Jan 24th, 2019 04:53 PM   Edit   Profile  

Every time I've played several examples of the same model guitar there were always subtle differences that you could tell.
That said when I played different guitars entirely there was often a similarity between them.
I think it comes down to the instrument and setup. But the wood does give me a sense of what to expect.
Age makes them vary as well. Even a few weeks playing time can affect the sound.

hushnel
Contributing Member
**********
**********
**

North Florida

A Friend of Bill W.
Mar 5th, 2019 10:17 AM   Edit   Profile  

I agree that tone is mostly a function of the top wood and it’s bracing. Mahogany, spruce, cedar will have differences that can be typical of these species.

I also think that the back and sides can sound differently, even when cut from the same tree. I think these differences are subtle, subjective and less typical. Much more difficult to contour the spacific tone in a significantly controlled way.

A laminated soundboard vs a solid is obvious when A/B’ed next to each other, the solid back and sides vs laminated can be less obvious.

Chris Greene
FDP Host

Idaho, USA

Buy your virtue signal here
Mar 5th, 2019 01:32 PM   Edit   Profile  

The problem is, of course, that no two guitars can ever be identical.

reverend mikey
Contributing Member
**********
****

N of I-90, E of I-29

You're old. Then vintage. Then good!
Mar 5th, 2019 02:21 PM   Edit   Profile  

***
"but the type of wood DOES impact the tone enough to distinguish them from one another"

The thing is, your two guitars have different tops, which is where the majority of the sound and tone comes from.

***

They both have Sitka Spruce tops.

jefe46
Contributing Member
**********
*********

State of Jefferson

Mar 5th, 2019 06:50 PM   Edit   Profile  

Torres (he who established the "modern" classical guitar) once made a guitar with back and sides of paper mache and all who played it reported it sounded and played as well as any solid wood unit.

RE Bob Taylor: he who said when challenged about the tone of his guitars being "sterile" said"tone is subjective".
I agree but tone in quality guitars such as Martin, Gibson, Collings,et al guitars is certainly different than the first decade of Taylor's acoustic appliances masquerading as guitars.

Cedar backs and sides.. say it ain't so Joe.

Cypress maybe but cedar backs and sides.

Tops are wehere it's at babe.

Frederich (sp) of France built his classical guitars with 4 mm laminated sides in an effort to give stiffness and stability to the body. He spent his time on the tops.

Ramirez beginning in the mid late 60s switched from spruce as being the standard for tops ( my 1961 Ramirez built by Contreras the shop foreman was spruce and 650 mm scale) to "Canadian Cedar. My sources (inside stuff) was Ramirez could get 5 cedar tops for what he paid for a single euro spruce top. (my long time friend Carlos Francisco Vega.. luthier and Spanish guitar historian and author RIP 2015) When Ramirez changed to the lesser expensive cedar tops they also changed to catalized finishes (rather than hand applied French polish such as mine) and more importantly extended the scale length from 650mm to 656 and 660+MM to compensate for the tonal changed.
They also switched form Brazilian rosewood as standard to east Indian, Brazilian became special order.. This before embargos and CITES.
They also reduced the staff and their former tiered skill staff system.

This was an economic move according to Carlos.

There is a reason why Martin guitars have a characteristic tone... formulaic. That and vanilla extract sprayed into the cases.


I have long contended that if you took 10 steel string guitars from the same maker (let's say Martin) with differing backs and sides and tops and body size and had them played behind a curtain (blind test) and put 50 people in an audience composed of builders players and so called experts...
and gave them a list of the guitars and had them guess which guitar was what you would get no better than 50% correct from the audience. Same goes for old violins vs new.

With all the rage about Adirondack in the early 2000s as being the desired pre war Martin choice for tops I bought a 2003 D-18 GE..

I later played more plain old spruce topped guitars and preferred.

The reason Marin used Adirondack pre war was it was available cheap and close.

Now the Adirondack (red spruce) is all but unobtanium and commands an upcharge, I still prefer available affordable Sitka spruce.

I have owned around 15 Martins, currently 2.

One is an 00-18V with what Martin calls a #8 Sitka top.. 8 for cosmetics only. Top grade mahogany backs , sides and neck (now they use (hardwood) nice ebony bits etc.. Fine guitar.

I also own a 1997 0000-1 ( one of 370 made between 1997-2000)Very nice mahogany backs neck, laminated mahogany sides, and a 5 to the inch pine box top.
To my ear the 0000-1 which was 20% of the MSRP of the 00-18 VS is a far better sounding guitar.
I keep the 00 hoping it will improve and it has a wider nut and saddle string spacing.

It's all in the top is correct.. but NOT by visual standards.

Hauser I and II and III used the less desirable bear claw tops which were considered rejects by most builders until recently. It is in the stiffness and flexibility ( a tough combination)
where tone is optimized.

Benedetto (before Taylor and his pallet stunt) made an arch top jazz guitar with off the shelf construction lumber and declared it as good as
anything he had made with premium wood.

Case by Case.

Of course all of this is just rumor mongering.

(This message was last edited by jefe46 at 08:38 PM, Mar 6th, 2019)

tuninguitars

Indiana

lets take it apart
Mar 13th, 2019 09:41 AM   Edit   Profile  

just for thought if you want to change the sound try different picks and strings they are the place the sound and tone start from and do make a difference , IMHO

hushnel
Contributing Member
**********
**********
**

North Florida

A Friend of Bill W.
Mar 13th, 2019 01:35 PM   Edit   Profile  

I remember Bob Taylor making the guitar out of oak pallets, and Robert call be Bob, Beneditto using the Homedepot wood, I ran into Bob Beneditto at the Newport Guitar Festival in Miami, he signed his book for me, the link below is a picture of him holding a banjo ukulele I made with a gourd. He got a kick out of it.

I didn’t expect to see him that early in the morning, I was working with the photographer cleaning and posing guitars for the photo shoot. I walked in and Bob said goodmorning Mike, what’s in the bag. I felt pretty strange showing “the” Robert Beneditto my funky homemade gourd uke but he really got a kick out of it. He said when he wrote the book he didn’t think it would inspire budding luthiers to make instruments from back yard vegetables.

I really like mahogany, all three of my Martins are solid mahogany, I chose it for it’s stability. The old Martin 1917 uke is a cannon of tone and the wood is in great shape, not a crack or opening seam. It did have a bracing problem when I first got it but this thing was stored in a south FLorida attic for who knows how long. The woman I got it from said is was her grandmothers who purchased it at a Southern California Fair around 1917-18 the uke itself has no serial number, the two CFMartin branding iron stamps are the only clue to it’s age 1917-1924.

My Guild B-50 has mahogany sides and back.

My newest Parlor guitar is spruce over laminated mahogany, I really like the little Yamaha.

Lousy photo but itâs Robert Beneditto and my gourd uke.

jvstratman

USA

Mar 13th, 2019 04:09 PM   Edit   Profile  

Supposedly, notes decay quicker with hog b&s while rosewood's notes are rich in overtones and bassier. However, I have a Martin D16 hog/adirondak that sounds as full "tonewise" as my sitka/rosewood Martin OM28V. Both sound stellar.

Next 20 Messages  

FDP Forum / FDP Unplugged - Acoustic Instruments / Study Shows Wood Type Has No Discernable Effect on Sound




Reply to this Topic
Display my email address             Lost your password?
Your Message:
Link Address (URL):
Link Title:




Moderators: Chris Greene  Iron Man  reverendrob  

FDP, LLC Privacy Policy: Your real name, username, and email
are held in confidence and not disclosed to any third parties, sold, or
used for anything other than FDP Forum registration unless you specifically authorize disclosure.

Furtkamp.com 
Internet Application Development

Copyright © 1999-2019 Fender Discussion Page, LLC   All Rights Reserved